SPL Team forum, pictures, videos, builds, advice.
 
HomeCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 box build!

View previous topic View next topic Go down 
AuthorMessage
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: box build!   Fri Jan 01, 2010 1:55 pm

heres a box im doin its 7 cubes net 3 6 inch ports that are 17" long tuned to about 40 i believe ( higher then i wanted) but the sub was hitting the one port so i had to cut them down a little still need to pull the top off and resin.glass the ports to the inside of the box then lots of saning brace it then pull only set up out and try er out! not sure which was i want to fire the ports should i fire them back? they will only be about 2 1/2 inchs away from back of the trunk pics!

(clickable)







Back to top Go down
View user profile
ross_freier

avatar

Posts : 222
Join date : 2009-12-06
Age : 28
Location : Brantford, ON

PostSubject: Re: box build!   Fri Jan 01, 2010 3:19 pm

u should have atleast the diameter of the port away from any surface

_________________
Back to top Go down
View user profile
Mat-Romain
Admin
avatar

Posts : 123
Join date : 2009-12-06
Age : 30
Location : Durham

PostSubject: Re: box build!   Fri Jan 01, 2010 3:53 pm

should deff fire into the cabbin, ur other setup should be louder tho...but i could be wrong

_________________
Mat Romain
Back to top Go down
View user profile http://teamassholespl.forumotion.com
ross_freier

avatar

Posts : 222
Join date : 2009-12-06
Age : 28
Location : Brantford, ON

PostSubject: Re: box build!   Fri Jan 01, 2010 3:54 pm

i'm sure the other is louder, lol

_________________
Back to top Go down
View user profile
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: Re: box build!   Fri Jan 01, 2010 9:29 pm

i need to try it firing into the back of the trunk firing into cabin sucks ass so far it gets alot louder once i open the trunk tho so im gunna try it the other way and see what happens
Back to top Go down
View user profile
DeadlySones

avatar

Posts : 139
Join date : 2009-12-07
Age : 40
Location : Ontario

PostSubject: Re: box build!   Sat Jan 02, 2010 8:54 am

Your amps not making anywhere near the power of your old setup. Thats half your problem right there. Wink
Back to top Go down
View user profile
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: Re: box build!   Sat Jan 02, 2010 2:08 pm

i know that lol but with the trunk open it got like 3 times as loud so i think part of its a loading problem gunna try spinning i around today
Back to top Go down
View user profile
DeadlySones

avatar

Posts : 139
Join date : 2009-12-07
Age : 40
Location : Ontario

PostSubject: Re: box build!   Sat Jan 02, 2010 5:21 pm

What are the dimensions of that box?
Back to top Go down
View user profile
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: Re: box build!   Sat Jan 02, 2010 6:43 pm

36 wide 13 1/2 tall 31 deep ports are 17 inchs long .125 thick ( 1/8th)
Back to top Go down
View user profile
DeadlySones

avatar

Posts : 139
Join date : 2009-12-07
Age : 40
Location : Ontario

PostSubject: Re: box build!   Sat Jan 02, 2010 7:09 pm

Is there room to port to the front and back sides?
Back to top Go down
View user profile
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: Re: box build!   Sat Jan 02, 2010 7:40 pm

what do you mean? port is now fireing backwards and its alot better then that it was so it can stay in there for a few weeks lol
Back to top Go down
View user profile
DeadlySones

avatar

Posts : 139
Join date : 2009-12-07
Age : 40
Location : Ontario

PostSubject: Re: box build!   Sun Jan 03, 2010 8:45 am

I wanna hear it, lol

I've done a little more tuning, and found a better CD. Wink Now if only my ECM would keep my voltage at 14+v it really slams. Stayed at 14+v the whole ride again this morning. Yet after a couple starts and stops (like by last night 4 trips throughout the day) It slowly goes back down to 13.2-.4v by the end of the day. BS
Back to top Go down
View user profile
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: Re: box build!   Sun Jan 03, 2010 1:42 pm

maybe sometime this week its nothing compared to the 10s but its alright to listin to and add some bass lol

youve seen my voltage drop hah i think if i fix that it would be quite a bit louder as well
Back to top Go down
View user profile
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: Re: box build!   Mon Jan 18, 2010 3:19 am

well i killed the one that was makin some noise... was pretty fun haha




Back to top Go down
View user profile
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: Re: box build!   Mon Jan 18, 2010 3:19 am

double posttt
Back to top Go down
View user profile
DeadlySones

avatar

Posts : 139
Join date : 2009-12-07
Age : 40
Location : Ontario

PostSubject: Re: box build!   Mon Jan 18, 2010 8:16 am

The fire was cool. lmao
Back to top Go down
View user profile
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: Re: box build!   Mon Jan 18, 2010 1:30 pm

it was i was pretty impressed lol
Back to top Go down
View user profile
DeadlySones

avatar

Posts : 139
Join date : 2009-12-07
Age : 40
Location : Ontario

PostSubject: Re: box build!   Fri Apr 23, 2010 10:56 am

UPDATES!!!! Twisted Evil
Back to top Go down
View user profile
fox_racin4



Posts : 47
Join date : 2009-12-28

PostSubject: Re: box build!   Fri Apr 23, 2010 7:26 pm

see other thread!
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: box build!   

Back to top Go down
 
box build!
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» rethinking 4ac build
» My Introduction/History. AE86/Ka86 Build
» TRD AE86 N2 Race Car Project build log
» Custom Chassis Build Thread
» How can i build a dullie tractor?

Permissions in this forum:You cannot reply to topics in this forum
Team Asshole SPL :: Builds :: Non-Team Builds-
Jump to: